Instructions
Open Case:
Begin by locating the more round tab that is on the opposite side of the button. Press the tab inward while pulling on the clear top to separate it from the orange piece.
Insert Battery:
Place the battery in the orange piece, orienting it as indicated by the diagram at the bottom of the unit.
Position Clear Piece:
Bring the clear piece down at an angle, guiding the rectangular tab to fit into the
matching rectangular hole.
matching rectangular hole.
Secure the Top:
Apply pressure to the remaining tab, ensuring that it slips into the orange case.
Push the top down until it clicks securely into place.
Push the top down until it clicks securely into place.
Verify Installation:
If done properly and the battery is functional, the candle will illuminate in a
solid green color, confirming successful installation.
solid green color, confirming successful installation.
Use the Light:
Press the button to select your desired lighting effect or continue to press to cycle
through the functions if you wish to turn the light off. When the light is off, press the button once to turn it on. Once on, press and hold the button to select the desired color. The color will remain when the button is released. Simply press once to cycle to the next lighting effect.
through the functions if you wish to turn the light off. When the light is off, press the button once to turn it on. Once on, press and hold the button to select the desired color. The color will remain when the button is released. Simply press once to cycle to the next lighting effect.